Produits
Panneaux
La S.A. Omniplex, importe de manière complètement indépendante toute la gamme de panneaux. La gamme s'étend des panneaux durs très bon marché aux produits plus chers tels que les contreplaqués Lauan, provenant d'Indonésie et de Malaisie. La très longue expérience d'Omniplex en tant qu'imporateur a permis de sélectionner, dans le monde, les meilleurs partenaires. Cette chaîne nous permet d'avoir un contrôle de qualité aussi bien dans le pays exportateur qu'après l'arrivée des marchandises en Europe. Vous trouverez ici une liste complète de tous les panneaux de notre stock.
Omniplex NV/SA   -   Gentsesteenweg 184  -    B-8530 HARELBEKE -  BELGIUM  -  +32 56 723 000
1
5
4
3
2
6
<
1
5
4
3
2
6
<
Elliotis Pine Radiata Pine See Kiefer Etc… Permitted if not severe As per face BIRCH PLYWOOD Grading Rules    (Russia, Baltic-Plywood, etc…) Not permitted Not conspicuous smooth Max 0.7mm if smooth and not  conspicuous Permitted if slight As per face Permitted if not conspicuous As per face smooth As per face Permitted if tight As per face Occasional pinworm holes permitted if Scattered, well filled and matched for colour As per face Permitted if very slight Permitted but not severe As per face Max size 300 x 10.0mm, max 2 at each end well filled and matched for colour Not permitted Not conspicuous Not permitted Permitted, max 150 x 15mm but plugged As per face As per face Not permitted As per face Permitted if not conspicuous, max 3 per panel. Permitted if not conspicuous and do not exceed 300 x 5.0mm long grain. Max 2 per panel, well made, parallel to edges and well matched for colour and grain direction Permitted if slight and smoothly sanded Max 0.7mm if smooth and not  conspicuous Smooth, free from conspicuous. Streaks or chatter As per face Max 3 per panel, well made, parallel to edges and well matched for colour and grain direction Permitted if slight Permitted if not conspicuous  and  Not clustered Permitted if not conspicuous  and smoothly sanded Not permitted Permitted if occasional, if level  and smoothly sanded Permitted if smoothly sanded Permitted if occasional if level and smoothly sanded Permitted if not conspicuous Occasional pinworm holes permitted if Scattered, well filled and matched for colour Max size 300 x 5.0mm, max 2 at each end well filled and matched for colour Max size 150 x 5.0mm, max 2 at  each End, well filled and  matched for colour Not permitted Max diameter 15mm, well filled and Sanded. Max 2 per panel Not permitted Max diameter 25mm. Max 5 per panel Permitted Permitted As per face Permitted is a selected one piece face, which is generally light and even in color.  Some very small, closed, pin  knots are allowed, as well as some brown streaks.  No patches, voids, or material streaks are  allowed.  The surface is well sanded. B-grade PINE PLYWOOD Grading Rules    (South-America, etc…) Dead knots &  Knot holes Open knot holes Live pin Not permitted Not permitted Hairline, max 100mm in length  Permitted, Max 3 per panel  (unfilled) Permitted if not conspicuous is a face that has been graded out from BB for small defects and mineral streaking.  CP typically has  more patches than grade BB which may not always be matched in color.  Some splits or less than  0.5 mm are allowed.  The surface is sanded. CP-grade C-grade Packaging quality, open defects allowed BB-grade is a one piece face, which is generally light and even in color.  Occasionally pin knots and mineral  streaking are allowed.  All open knots and defects other than those allowed in grade B have been  cut out and replaced with oval or "football" patches.  The patch veneer is the same grade and  specie, and is typically of the same color.  The surface is sanded. Not permitted Not permitted Panneaux oa/sd = op aanvraag √ = stockprogramma Platen I Blisters / delamination Short core veneers Core gaps Core overlaps Permitted, max 150 x 15mm but plugged Nota : onder voorbehoud van tussentijdse verkoop Permitted, max 200 x 5.0mm, smooth and not severe Wet pitch Press marks Not permitted Not permitted Not permitted Not permitted Pine Plywood Max 1 per panel, well made, parallel to edges and well matched for colour and grain direction Mechanical  defects(oil stains,  chain marks,  sanding burns etc) Bark Permitted if very slight Permitted if not conspicuous Note:  The grading rules are not based on any specific grading rules and are a combination of BSI, IHPA & JPIC grading  rules which are open to different interpretations. Furthermore, these rules are intended to be used as a general guidelines only and no responsibility will be accepted for qualities which do not comply with these guidelines. oa/sd = sur demande Note : sous réserve de vente Permitted if slight and smoothly  sanded Shims Permitted if not conspicuous and do not exceed 300 x 5.0mm long grain. Veneer joints Knife marks Sanding Not permitted Smooth, free from conspicuous Streaks or chatter Max 2 per panel, well made, parallel to edges and well matched for colour and grain direction Not permitted Rough cut Torn grain Vine marks Pin holes √ = programme de stock Patches Permitted if not conspicuous, max 3 per panel. Not permitted Tape or glue residue Pinworm holes, tracks Putty smear Permitted if not conspicuous Not permitted Filled splits Open split As per face Sound burls BACK FACE BACK Max diameter 25mm Not clustered Max 6 per panel G E N E R A L     P L Y W O O D     G R A D I N G     R U L E S    [BS EN636] South-East  ASIA PLYWOOD  (Including chinese Okoume faced / poplar plywood) HARDWOOD PARTICULARS BB/CC Not permitted √ = programme de stock = stockprogramma Panneaux = op aanvraag Platen Note : sous réserve de vente Max diameter 40mm Max 6 per panel Not permitted As per face oa/sd = sur demande Permitted if smooth Sound live knots As per face oa/sd Permitted Permitted if only slightly conspicuous As per face As per face Minor natural  Discolouratioon Permitted if only slightly conspicuous Permitted if not conspicuous Not permitted Dry pitch pockets Permitted if well filled, Max size 100 x 4mm, Max 2 per panel Cross split As per face Hairline, max 100mm in length  Permitted, Max 1 per panel As per face Hairline, max 100mm in length  Permitted, Max 3 per panel  (unfilled) Permitted if well filled Max size 100 x 4mm, max 2 per panel Hairline, max 100mm in length  Permitted, Max 1 per panel FACE BACK FACE BACK C+/C B/BB Permitted but not severe Not permitted Permitted if very slight Permitted if smoothly sanded Max size 100 x 4.0mm, max 2 per Panel if level and smoothly sanded Not permitted Max size 150 x 3.0mm, max 2 at each End, well filled and matched for colour Permitted if tight & not Not permitted Not permitted Max diameter 13mm Not clustered Max 4 per panel B/BB Nota : onder voorbehoud van tussentijdse verkoop I FACE √
FR
Import Import Siège principal Siège principal Dépôt Leieboorden Dépôt Leieboorden Dépôt Bavikhove Dépôt Bavikhove Dépôt Méru (Oise) France Dépôt Méru (Oise) France Histoire Histoire Philosophie Philosophie Exploitation durable Exploitation durable ECO-certificats ECO-certificats Panneaux Panneaux Bois Résineux Bois Résineux Bois Tropicaux Bois Tropicaux Bois Rabotés Bois Rabotés Menuiserie Menuiserie Durabilité Durabilité Transport & Enlèvements Transport & Enlèvements Info générales Info générales General Management General Management Vente BE Vente BE Vente FR Vente FR Finance & Accountancy Finance & Accountancy Production, Transport  & Qualitycontrole Production, Transport  & Qualitycontrole Achat Achat Contact Histoire et Ecologie Produits Sociéte et Photos Production Download - PDF Accueil